Windows are one of the most important features of a house if you want a good-looking and well-lighted house. Cleaning houses can be very problematic, especially windows. You need to consider the method, the appliances, and many other things so that you can have satisfactorily cleaned windows. Here are some tips on how to have an outcome that will please you.
How to Keep Your Windows at Home Clean
Contents
-
Removing Stains
If you need to clean a window without streaks, start by removing anything from the glass’s top, including built-up dirt, debris, stickers, glue, paint, gum, and other tenacious stains.
White vinegar or a mineral deposit cleaner can be used to remove stubborn stains and filth. Spray the spots with vinegar and wait five minutes before cleaning them away, or wipe the area with a damp sponge and mineral cleanser. Soak the spot and remove the tape using a scraper to remove the tape, paint, and sticky messes. Keep the spatula at a 45 ° angle to the glass and gently press down behind the tape as you move ahead.
-
Remove Dirt And Dust
Sweep debris off the window frame with a brush or vacuum it up with the cleaning attachment on your machine. When dirt is combined with a cleaner, it will not develop into a sticky mess. Nowadays, we are lucky enough that we can seek professional help, such as the one from SweetWaterWindowCleaning.com, and be sure our windows will be properly cleaned. Remember that if your window screen is very filthy, you need to remove it and scrub it with hot, soapy water and a gentle brush, then rinse and dry it before replacing it.
-
Choose A Proper Spray
Don’t be stingy with the spray, especially if your windows are filthy. You’ll need a lot of cleansers to dissolve and remove the filth so it can be washed away entirely; if you don’t, you’ll end up with streaks. If you are not into already made products, you can go with a homemade version.
You can try to mix 2 cups of water, a quarter cup of rubbing alcohol with a 70% concentration, and 1/2 cup white vinegar or apple cider vinegar. In a spray bottle, combine all of the ingredients and mix thoroughly.
Dish soap is another cheap and effective way to clean glass surfaces, and you only need a tiny quantity to get the job done.
- 16 oz. boiling water
- a little amount of mild dishwashing liquid
In a big bucket, mix water and dishwashing liquid. To get a streak-free finish, it is better to use distilled water. Any form of water that contains minerals or other components should be avoided since they might leave streaks and markings on otherwise clean windows.
When non-distilled water evaporates from windows, it can leave residues of these metals and minerals on the glass, which will create visible imprints.
For your DIY glass cleaner, be sure to use a fresh, clean spray bottle; old bottles may have leftover chemicals that might trigger a response. It should also be labeled appropriately. Any cleaning containing vinegar should not be used on marble and granite, as it may cause damage. When using different cleaners, always apply on a tiny area first in a hidden spot to ensure the surface is not damaged.
-
Scrubbing
To soak your sponge with a cleaning solution, dip it into the bucket. Remove the sponge and gently compress it to keep it from becoming soaking wet. Wipe the sponge across the whole window pane, using mild pressure to apply an equal coat of cleaner.
- To wipe the windows, you may use whatever motion you wish, such as circles, an up-and-down motion, or a back-and-forth zigzag.
- To guarantee that no debris or grime is left behind, clean every inch of glass.
- Before going on to the next window, clean and properly dry the previous one.
-
Drying
Use the rubber squeegee to remove the water once the glass has been covered with a cleaning solution. Begin from the top of the window and work your way down in horizontal swipes. Wipe the squeegee dry with a lint-free towel. Work your way down to the bottom of the window, overlapping each stroke by approximately an inch (2.5 cm) and letting it dry completely. Because removing all of the water from the window is one of the keys to a streak-free clean, it’s crucial to use a fresh squeegee with a sharp blade.
-
Avoid This
Always take care not to take the squeegee off the window in the middle of a swipe. It’s critical to keep the squeegee blade in touch with the glass the entire time while drying a glass in horizontal swipes. If the blade breaks, water will be left behind, resulting in streaks as the water dries. Apply slight pressure to the scraper as you swipe from one side of the window to the other to ensure the blade stays in touch with the glass. Another essential is a dry squeegee. When the squeegee is wet, it will create watermarks on the glass, which will dry to produce streaks.
These were some tips for you to consider when cleaning your windows next time. Take note that you should do it in regular intervals because it will make your life a lot easier.